Struct std::io::Cursor

1.0.0 · source ·
pub struct Cursor<T> { /* private fields */ }
Expand description

A Cursor wraps an in-memory buffer and provides it with a Seek implementation.

Cursors are used with in-memory buffers, anything implementing AsRef<[u8]>, to allow them to implement Read and/or Write, allowing these buffers to be used anywhere you might use a reader or writer that does actual I/O.

The standard library implements some I/O traits on various types which are commonly used as a buffer, like Cursor<Vec<u8>> and Cursor<&[u8]>.

§Examples

We may want to write bytes to a File in our production code, but use an in-memory buffer in our tests. We can do this with Cursor:

use std::io::prelude::*;
use std::io::{self, SeekFrom};
use std::fs::File;

// a library function we've written
fn write_ten_bytes_at_end<W: Write + Seek>(mut writer: W) -> io::Result<()> {
    writer.seek(SeekFrom::End(-10))?;

    for i in 0..10 {
        writer.write(&[i])?;
    }

    // all went well
    Ok(())
}

// Here's some code that uses this library function.
//
// We might want to use a BufReader here for efficiency, but let's
// keep this example focused.
let mut file = File::create("foo.txt")?;
// First, we need to allocate 10 bytes to be able to write into.
file.set_len(10)?;

write_ten_bytes_at_end(&mut file)?;

// now let's write a test
#[test]
fn test_writes_bytes() {
    // setting up a real File is much slower than an in-memory buffer,
    // let's use a cursor instead
    use std::io::Cursor;
    let mut buff = Cursor::new(vec![0; 15]);

    write_ten_bytes_at_end(&mut buff).unwrap();

    assert_eq!(&buff.get_ref()[5..15], &[0, 1, 2, 3, 4, 5, 6, 7, 8, 9]);
}

Implementations§

source§

impl<T> Cursor<T>

1.0.0 (const: 1.79.0) · source

pub const fn new(inner: T) -> Cursor<T>

Creates a new cursor wrapping the provided underlying in-memory buffer.

Cursor initial position is 0 even if underlying buffer (e.g., Vec) is not empty. So writing to cursor starts with overwriting Vec content, not with appending to it.

§Examples
use std::io::Cursor;

let buff = Cursor::new(Vec::new());
1.0.0 · source

pub fn into_inner(self) -> T

Consumes this cursor, returning the underlying value.

§Examples
use std::io::Cursor;

let buff = Cursor::new(Vec::new());

let vec = buff.into_inner();
1.0.0 (const: 1.79.0) · source

pub const fn get_ref(&self) -> &T

Gets a reference to the underlying value in this cursor.

§Examples
use std::io::Cursor;

let buff = Cursor::new(Vec::new());

let reference = buff.get_ref();
1.0.0 · source

pub fn get_mut(&mut self) -> &mut T

Gets a mutable reference to the underlying value in this cursor.

Care should be taken to avoid modifying the internal I/O state of the underlying value as it may corrupt this cursor’s position.

§Examples
use std::io::Cursor;

let mut buff = Cursor::new(Vec::new());

let reference = buff.get_mut();
1.0.0 (const: 1.79.0) · source

pub const fn position(&self) -> u64

Returns the current position of this cursor.

§Examples
use std::io::Cursor;
use std::io::prelude::*;
use std::io::SeekFrom;

let mut buff = Cursor::new(vec![1, 2, 3, 4, 5]);

assert_eq!(buff.position(), 0);

buff.seek(SeekFrom::Current(2)).unwrap();
assert_eq!(buff.position(), 2);

buff.seek(SeekFrom::Current(-1)).unwrap();
assert_eq!(buff.position(), 1);
1.0.0 · source

pub fn set_position(&mut self, pos: u64)

Sets the position of this cursor.

§Examples
use std::io::Cursor;

let mut buff = Cursor::new(vec![1, 2, 3, 4, 5]);

assert_eq!(buff.position(), 0);

buff.set_position(2);
assert_eq!(buff.position(), 2);

buff.set_position(4);
assert_eq!(buff.position(), 4);
source§

impl<T> Cursor<T>
where T: AsRef<[u8]>,

source

pub fn split(&self) -> (&[u8], &[u8])

🔬This is a nightly-only experimental API. (cursor_split #86369)

Splits the underlying slice at the cursor position and returns them.

§Examples
#![feature(cursor_split)]
use std::io::Cursor;

let mut buff = Cursor::new(vec![1, 2, 3, 4, 5]);

assert_eq!(buff.split(), ([].as_slice(), [1, 2, 3, 4, 5].as_slice()));

buff.set_position(2);
assert_eq!(buff.split(), ([1, 2].as_slice(), [3, 4, 5].as_slice()));

buff.set_position(6);
assert_eq!(buff.split(), ([1, 2, 3, 4, 5].as_slice(), [].as_slice()));
source§

impl<T> Cursor<T>
where T: AsMut<[u8]>,

source

pub fn split_mut(&mut self) -> (&mut [u8], &mut [u8])

🔬This is a nightly-only experimental API. (cursor_split #86369)

Splits the underlying slice at the cursor position and returns them mutably.

§Examples
#![feature(cursor_split)]
use std::io::Cursor;

let mut buff = Cursor::new(vec![1, 2, 3, 4, 5]);

assert_eq!(buff.split_mut(), ([].as_mut_slice(), [1, 2, 3, 4, 5].as_mut_slice()));

buff.set_position(2);
assert_eq!(buff.split_mut(), ([1, 2].as_mut_slice(), [3, 4, 5].as_mut_slice()));

buff.set_position(6);
assert_eq!(buff.split_mut(), ([1, 2, 3, 4, 5].as_mut_slice(), [].as_mut_slice()));

Trait Implementations§

1.0.0 · source§

impl<T> BufRead for Cursor<T>
where T: AsRef<[u8]>,

source§

fn fill_buf(&mut self) -> Result<&[u8]>

Returns the contents of the internal buffer, filling it with more data from the inner reader if it is empty. Read more
source§

fn consume(&mut self, amt: usize)

Tells this buffer that amt bytes have been consumed from the buffer, so they should no longer be returned in calls to read. Read more
source§

fn has_data_left(&mut self) -> Result<bool>

🔬This is a nightly-only experimental API. (buf_read_has_data_left #86423)
Checks if the underlying Read has any data left to be read. Read more
1.0.0 · source§

fn read_until(&mut self, byte: u8, buf: &mut Vec<u8>) -> Result<usize>

Reads all bytes into buf until the delimiter byte or EOF is reached. Read more
source§

fn skip_until(&mut self, byte: u8) -> Result<usize>

🔬This is a nightly-only experimental API. (bufread_skip_until #111735)
Skips all bytes until the delimiter byte or EOF is reached. Read more
1.0.0 · source§

fn read_line(&mut self, buf: &mut String) -> Result<usize>

Reads all bytes until a newline (the 0xA byte) is reached, and append them to the provided String buffer. Read more
1.0.0 · source§

fn split(self, byte: u8) -> Split<Self>
where Self: Sized,

Returns an iterator over the contents of this reader split on the byte byte. Read more
1.0.0 · source§

fn lines(self) -> Lines<Self>
where Self: Sized,

Returns an iterator over the lines of this reader. Read more
1.0.0 · source§

impl<T> Clone for Cursor<T>
where T: Clone,

source§

fn clone(&self) -> Self

Returns a copy of the value. Read more
source§

fn clone_from(&mut self, other: &Self)

Performs copy-assignment from source. Read more
1.0.0 · source§

impl<T: Debug> Debug for Cursor<T>

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
1.0.0 · source§

impl<T: Default> Default for Cursor<T>

source§

fn default() -> Cursor<T>

Returns the “default value” for a type. Read more
1.0.0 · source§

impl<T: PartialEq> PartialEq for Cursor<T>

source§

fn eq(&self, other: &Cursor<T>) -> bool

Tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
1.0.0 · source§

impl<T> Read for Cursor<T>
where T: AsRef<[u8]>,

source§

fn read(&mut self, buf: &mut [u8]) -> Result<usize>

Pull some bytes from this source into the specified buffer, returning how many bytes were read. Read more
source§

fn read_buf(&mut self, cursor: BorrowedCursor<'_>) -> Result<()>

🔬This is a nightly-only experimental API. (read_buf #78485)
Pull some bytes from this source into the specified buffer. Read more
source§

fn read_vectored(&mut self, bufs: &mut [IoSliceMut<'_>]) -> Result<usize>

Like read, except that it reads into a slice of buffers. Read more
source§

fn is_read_vectored(&self) -> bool

🔬This is a nightly-only experimental API. (can_vector #69941)
Determines if this Reader has an efficient read_vectored implementation. Read more
source§

fn read_exact(&mut self, buf: &mut [u8]) -> Result<()>

Reads the exact number of bytes required to fill buf. Read more
source§

fn read_buf_exact(&mut self, cursor: BorrowedCursor<'_>) -> Result<()>

🔬This is a nightly-only experimental API. (read_buf #78485)
Reads the exact number of bytes required to fill cursor. Read more
source§

fn read_to_end(&mut self, buf: &mut Vec<u8>) -> Result<usize>

Reads all bytes until EOF in this source, placing them into buf. Read more
source§

fn read_to_string(&mut self, buf: &mut String) -> Result<usize>

Reads all bytes until EOF in this source, appending them to buf. Read more
1.0.0 · source§

fn by_ref(&mut self) -> &mut Self
where Self: Sized,

Creates a “by reference” adaptor for this instance of Read. Read more
1.0.0 · source§

fn bytes(self) -> Bytes<Self>
where Self: Sized,

Transforms this Read instance to an Iterator over its bytes. Read more
1.0.0 · source§

fn chain<R: Read>(self, next: R) -> Chain<Self, R>
where Self: Sized,

Creates an adapter which will chain this stream with another. Read more
1.0.0 · source§

fn take(self, limit: u64) -> Take<Self>
where Self: Sized,

Creates an adapter which will read at most limit bytes from it. Read more
1.0.0 · source§

impl<T> Seek for Cursor<T>
where T: AsRef<[u8]>,

source§

fn seek(&mut self, style: SeekFrom) -> Result<u64>

Seek to an offset, in bytes, in a stream. Read more
source§

fn stream_len(&mut self) -> Result<u64>

🔬This is a nightly-only experimental API. (seek_stream_len #59359)
Returns the length of this stream (in bytes). Read more
source§

fn stream_position(&mut self) -> Result<u64>

Returns the current seek position from the start of the stream. Read more
1.55.0 · source§

fn rewind(&mut self) -> Result<()>

Rewind to the beginning of a stream. Read more
1.80.0 · source§

fn seek_relative(&mut self, offset: i64) -> Result<()>

Seeks relative to the current position. Read more
1.0.0 · source§

impl Write for Cursor<&mut [u8]>

source§

fn write(&mut self, buf: &[u8]) -> Result<usize>

Writes a buffer into this writer, returning how many bytes were written. Read more
source§

fn write_vectored(&mut self, bufs: &[IoSlice<'_>]) -> Result<usize>

Like write, except that it writes from a slice of buffers. Read more
source§

fn is_write_vectored(&self) -> bool

🔬This is a nightly-only experimental API. (can_vector #69941)
Determines if this Writer has an efficient write_vectored implementation. Read more
source§

fn flush(&mut self) -> Result<()>

Flushes this output stream, ensuring that all intermediately buffered contents reach their destination. Read more
1.0.0 · source§

fn write_all(&mut self, buf: &[u8]) -> Result<()>

Attempts to write an entire buffer into this writer. Read more
source§

fn write_all_vectored(&mut self, bufs: &mut [IoSlice<'_>]) -> Result<()>

🔬This is a nightly-only experimental API. (write_all_vectored #70436)
Attempts to write multiple buffers into this writer. Read more
1.0.0 · source§

fn write_fmt(&mut self, fmt: Arguments<'_>) -> Result<()>

Writes a formatted string into this writer, returning any error encountered. Read more
1.0.0 · source§

fn by_ref(&mut self) -> &mut Self
where Self: Sized,

Creates a “by reference” adapter for this instance of Write. Read more
1.25.0 · source§

impl<A> Write for Cursor<&mut Vec<u8, A>>
where A: Allocator,

source§

fn write(&mut self, buf: &[u8]) -> Result<usize>

Writes a buffer into this writer, returning how many bytes were written. Read more
source§

fn write_vectored(&mut self, bufs: &[IoSlice<'_>]) -> Result<usize>

Like write, except that it writes from a slice of buffers. Read more
source§

fn is_write_vectored(&self) -> bool

🔬This is a nightly-only experimental API. (can_vector #69941)
Determines if this Writer has an efficient write_vectored implementation. Read more
source§

fn flush(&mut self) -> Result<()>

Flushes this output stream, ensuring that all intermediately buffered contents reach their destination. Read more
1.0.0 · source§

fn write_all(&mut self, buf: &[u8]) -> Result<()>

Attempts to write an entire buffer into this writer. Read more
source§

fn write_all_vectored(&mut self, bufs: &mut [IoSlice<'_>]) -> Result<()>

🔬This is a nightly-only experimental API. (write_all_vectored #70436)
Attempts to write multiple buffers into this writer. Read more
1.0.0 · source§

fn write_fmt(&mut self, fmt: Arguments<'_>) -> Result<()>

Writes a formatted string into this writer, returning any error encountered. Read more
1.0.0 · source§

fn by_ref(&mut self) -> &mut Self
where Self: Sized,

Creates a “by reference” adapter for this instance of Write. Read more
1.61.0 · source§

impl<const N: usize> Write for Cursor<[u8; N]>

source§

fn write(&mut self, buf: &[u8]) -> Result<usize>

Writes a buffer into this writer, returning how many bytes were written. Read more
source§

fn write_vectored(&mut self, bufs: &[IoSlice<'_>]) -> Result<usize>

Like write, except that it writes from a slice of buffers. Read more
source§

fn is_write_vectored(&self) -> bool

🔬This is a nightly-only experimental API. (can_vector #69941)
Determines if this Writer has an efficient write_vectored implementation. Read more
source§

fn flush(&mut self) -> Result<()>

Flushes this output stream, ensuring that all intermediately buffered contents reach their destination. Read more
1.0.0 · source§

fn write_all(&mut self, buf: &[u8]) -> Result<()>

Attempts to write an entire buffer into this writer. Read more
source§

fn write_all_vectored(&mut self, bufs: &mut [IoSlice<'_>]) -> Result<()>

🔬This is a nightly-only experimental API. (write_all_vectored #70436)
Attempts to write multiple buffers into this writer. Read more
1.0.0 · source§

fn write_fmt(&mut self, fmt: Arguments<'_>) -> Result<()>

Writes a formatted string into this writer, returning any error encountered. Read more
1.0.0 · source§

fn by_ref(&mut self) -> &mut Self
where Self: Sized,

Creates a “by reference” adapter for this instance of Write. Read more
1.5.0 · source§

impl<A> Write for Cursor<Box<[u8], A>>
where A: Allocator,

source§

fn write(&mut self, buf: &[u8]) -> Result<usize>

Writes a buffer into this writer, returning how many bytes were written. Read more
source§

fn write_vectored(&mut self, bufs: &[IoSlice<'_>]) -> Result<usize>

Like write, except that it writes from a slice of buffers. Read more
source§

fn is_write_vectored(&self) -> bool

🔬This is a nightly-only experimental API. (can_vector #69941)
Determines if this Writer has an efficient write_vectored implementation. Read more
source§

fn flush(&mut self) -> Result<()>

Flushes this output stream, ensuring that all intermediately buffered contents reach their destination. Read more
1.0.0 · source§

fn write_all(&mut self, buf: &[u8]) -> Result<()>

Attempts to write an entire buffer into this writer. Read more
source§

fn write_all_vectored(&mut self, bufs: &mut [IoSlice<'_>]) -> Result<()>

🔬This is a nightly-only experimental API. (write_all_vectored #70436)
Attempts to write multiple buffers into this writer. Read more
1.0.0 · source§

fn write_fmt(&mut self, fmt: Arguments<'_>) -> Result<()>

Writes a formatted string into this writer, returning any error encountered. Read more
1.0.0 · source§

fn by_ref(&mut self) -> &mut Self
where Self: Sized,

Creates a “by reference” adapter for this instance of Write. Read more
1.0.0 · source§

impl<A> Write for Cursor<Vec<u8, A>>
where A: Allocator,

source§

fn write(&mut self, buf: &[u8]) -> Result<usize>

Writes a buffer into this writer, returning how many bytes were written. Read more
source§

fn write_vectored(&mut self, bufs: &[IoSlice<'_>]) -> Result<usize>

Like write, except that it writes from a slice of buffers. Read more
source§

fn is_write_vectored(&self) -> bool

🔬This is a nightly-only experimental API. (can_vector #69941)
Determines if this Writer has an efficient write_vectored implementation. Read more
source§

fn flush(&mut self) -> Result<()>

Flushes this output stream, ensuring that all intermediately buffered contents reach their destination. Read more
1.0.0 · source§

fn write_all(&mut self, buf: &[u8]) -> Result<()>

Attempts to write an entire buffer into this writer. Read more
source§

fn write_all_vectored(&mut self, bufs: &mut [IoSlice<'_>]) -> Result<()>

🔬This is a nightly-only experimental API. (write_all_vectored #70436)
Attempts to write multiple buffers into this writer. Read more
1.0.0 · source§

fn write_fmt(&mut self, fmt: Arguments<'_>) -> Result<()>

Writes a formatted string into this writer, returning any error encountered. Read more
1.0.0 · source§

fn by_ref(&mut self) -> &mut Self
where Self: Sized,

Creates a “by reference” adapter for this instance of Write. Read more
1.0.0 · source§

impl<T: Eq> Eq for Cursor<T>

1.0.0 · source§

impl<T> StructuralPartialEq for Cursor<T>

Auto Trait Implementations§

§

impl<T> Freeze for Cursor<T>
where T: Freeze,

§

impl<T> RefUnwindSafe for Cursor<T>
where T: RefUnwindSafe,

§

impl<T> Send for Cursor<T>
where T: Send,

§

impl<T> Sync for Cursor<T>
where T: Sync,

§

impl<T> Unpin for Cursor<T>
where T: Unpin,

§

impl<T> UnwindSafe for Cursor<T>
where T: UnwindSafe,

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> CloneToUninit for T
where T: Clone,

source§

unsafe fn clone_to_uninit(&self, dst: *mut T)

🔬This is a nightly-only experimental API. (clone_to_uninit #126799)
Performs copy-assignment from self to dst. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> ToOwned for T
where T: Clone,

source§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

source§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.