Trait core::cmp::PartialEq

pub trait PartialEq<Rhs: ?Sized = Self> {
    // Required method
    fn eq(&self, other: &Rhs) -> bool;

    // Provided method
    fn ne(&self, other: &Rhs) -> bool { ... }
}

Trait for comparisons using the equality operator.

Implementing this trait for types provides the == and != operators for those types.

x.eq(y) can also be written x == y, and x.ne(y) can be written x != y. We use the easier-to-read infix notation in the remainder of this documentation.

This trait allows for comparisons using the equality operator, for types that do not have a full equivalence relation. For example, in floating point numbers NaN != NaN, so floating point types implement PartialEq but not Eq. Formally speaking, when Rhs == Self, this trait corresponds to a partial equivalence relation.

Implementations must ensure that eq and ne are consistent with each other:

• a != b if and only if !(a == b).

The default implementation of ne provides this consistency and is almost always sufficient. It should not be overridden without very good reason.

If PartialOrd or Ord are also implemented for Self and Rhs, their methods must also be consistent with PartialEq (see the documentation of those traits for the exact requirements). It’s easy to accidentally make them disagree by deriving some of the traits and manually implementing others.

The equality relation == must satisfy the following conditions (for all a, b, c of type A, B, C):

• Symmetry: if A: PartialEq<B> and B: PartialEq<A>, then a == b implies b == a; and

• Transitivity: if A: PartialEq<B> and B: PartialEq<C> and A: PartialEq<C>, then a == b and b == c implies a == c. This must also work for longer chains, such as when A: PartialEq<B>, B: PartialEq<C>, C: PartialEq<D>, and A: PartialEq<D> all exist.

Note that the B: PartialEq<A> (symmetric) and A: PartialEq<C> (transitive) impls are not forced to exist, but these requirements apply whenever they do exist.

Violating these requirements is a logic error. The behavior resulting from a logic error is not specified, but users of the trait must ensure that such logic errors do not result in undefined behavior. This means that unsafe code must not rely on the correctness of these methods.

Cross-crate considerations

Upholding the requirements stated above can become tricky when one crate implements PartialEq for a type of another crate (i.e., to allow comparing one of its own types with a type from the standard library). The recommendation is to never implement this trait for a foreign type. In other words, such a crate should do impl PartialEq<ForeignType> for LocalType, but it should not do impl PartialEq<LocalType> for ForeignType.

This avoids the problem of transitive chains that criss-cross crate boundaries: for all local types T, you may assume that no other crate will add impls that allow comparing T == U. In other words, if other crates add impls that allow building longer transitive chains U1 == ... == T == V1 == ..., then all the types that appear to the right of T must be types that the crate defining T already knows about. This rules out transitive chains where downstream crates can add new impls that “stitch together” comparisons of foreign types in ways that violate transitivity.

Not having such foreign impls also avoids forward compatibility issues where one crate adding more PartialEq implementations can cause build failures in downstream crates.

Derivable

This trait can be used with #[derive]. When derived on structs, two instances are equal if all fields are equal, and not equal if any fields are not equal. When derived on enums, two instances are equal if they are the same variant and all fields are equal.

How can I implement PartialEq?

An example implementation for a domain in which two books are considered the same book if their ISBN matches, even if the formats differ:

enum BookFormat {
    Paperback,
    Hardback,
    Ebook,
}

struct Book {
    isbn: i32,
    format: BookFormat,
}

impl PartialEq for Book {
    fn eq(&self, other: &Self) -> bool {
        self.isbn == other.isbn
    }
}

let b1 = Book { isbn: 3, format: BookFormat::Paperback };
let b2 = Book { isbn: 3, format: BookFormat::Ebook };
let b3 = Book { isbn: 10, format: BookFormat::Paperback };

assert!(b1 == b2);
assert!(b1 != b3);

How can I compare two different types?

The type you can compare with is controlled by PartialEq’s type parameter. For example, let’s tweak our previous code a bit:

// The derive implements <BookFormat> == <BookFormat> comparisons
#[derive(PartialEq)]
enum BookFormat {
    Paperback,
    Hardback,
    Ebook,
}

struct Book {
    isbn: i32,
    format: BookFormat,
}

// Implement <Book> == <BookFormat> comparisons
impl PartialEq<BookFormat> for Book {
    fn eq(&self, other: &BookFormat) -> bool {
        self.format == *other
    }
}

// Implement <BookFormat> == <Book> comparisons
impl PartialEq<Book> for BookFormat {
    fn eq(&self, other: &Book) -> bool {
        *self == other.format
    }
}

let b1 = Book { isbn: 3, format: BookFormat::Paperback };

assert!(b1 == BookFormat::Paperback);
assert!(BookFormat::Ebook != b1);

By changing impl PartialEq for Book to impl PartialEq<BookFormat> for Book, we allow BookFormats to be compared with Books.

A comparison like the one above, which ignores some fields of the struct, can be dangerous. It can easily lead to an unintended violation of the requirements for a partial equivalence relation. For example, if we kept the above implementation of PartialEq<Book> for BookFormat and added an implementation of PartialEq<Book> for Book (either via a #[derive] or via the manual implementation from the first example) then the result would violate transitivity:

#[derive(PartialEq)]
enum BookFormat {
    Paperback,
    Hardback,
    Ebook,
}

#[derive(PartialEq)]
struct Book {
    isbn: i32,
    format: BookFormat,
}

impl PartialEq<BookFormat> for Book {
    fn eq(&self, other: &BookFormat) -> bool {
        self.format == *other
    }
}

impl PartialEq<Book> for BookFormat {
    fn eq(&self, other: &Book) -> bool {
        *self == other.format
    }
}

fn main() {
    let b1 = Book { isbn: 1, format: BookFormat::Paperback };
    let b2 = Book { isbn: 2, format: BookFormat::Paperback };

    assert!(b1 == BookFormat::Paperback);
    assert!(BookFormat::Paperback == b2);

    // The following should hold by transitivity but doesn't.
    assert!(b1 == b2); // <-- PANICS
}

Examples

let x: u32 = 0;
let y: u32 = 1;

assert_eq!(x == y, false);
assert_eq!(x.eq(&y), false);

Required Methods

fn eq(&self, other: &Rhs) -> bool

Tests for self and other values to be equal, and is used by ==.

Provided Methods

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

Implementors

impl PartialEq for AsciiChar

impl PartialEq for Infallible

impl PartialEq for core::fmt::Alignment

impl PartialEq for IpAddr

impl PartialEq for Ipv6MulticastScope

impl PartialEq for SocketAddr

impl PartialEq for FpCategory

impl PartialEq for IntErrorKind

impl PartialEq for SearchStep

impl PartialEq for core::sync::atomic::Ordering

impl PartialEq for core::cmp::Ordering

impl PartialEq for bool

impl PartialEq for char

impl PartialEq for f16

impl PartialEq for f32

impl PartialEq for f64

impl PartialEq for f128

impl PartialEq for i8

impl PartialEq for i16

impl PartialEq for i32

impl PartialEq for i64

impl PartialEq for i128

impl PartialEq for isize

impl PartialEq for !

impl PartialEq for str

impl PartialEq for u8

impl PartialEq for u16

impl PartialEq for u32

impl PartialEq for u64

impl PartialEq for u128

impl PartialEq for ()

impl PartialEq for usize

impl PartialEq for AllocError

impl PartialEq for Layout

impl PartialEq for LayoutError

impl PartialEq for TypeId

impl PartialEq for CpuidResult

Available on x86 or x86-64 only.

impl PartialEq for CharTryFromError

impl PartialEq for DecodeUtf16Error

impl PartialEq for ParseCharError

impl PartialEq for TryFromCharError

impl PartialEq for FromBytesUntilNulError

impl PartialEq for FromBytesWithNulError

impl PartialEq for CStr

impl PartialEq for Error

impl PartialEq for PhantomPinned

impl PartialEq for Assume

impl PartialEq for AddrParseError

impl PartialEq for Ipv4Addr

impl PartialEq for Ipv6Addr

impl PartialEq for SocketAddrV4

impl PartialEq for SocketAddrV6

impl PartialEq for ParseFloatError

impl PartialEq for ParseIntError

impl PartialEq for TryFromIntError

impl PartialEq for RangeFull

impl PartialEq for core::ptr::Alignment

impl PartialEq for ParseBoolError

impl PartialEq for Utf8Error

impl PartialEq for RawWaker

impl PartialEq for RawWakerVTable

impl PartialEq for Duration

impl PartialEq for TryFromFloatSecsError

impl PartialEq<IpAddr> for Ipv4Addr

impl PartialEq<IpAddr> for Ipv6Addr

impl PartialEq<Ipv4Addr> for IpAddr

impl PartialEq<Ipv6Addr> for IpAddr

impl<'a> PartialEq for Location<'a>

impl<'a> PartialEq for Utf8Chunk<'a>

impl<A, B: ?Sized> PartialEq<&B> for &A

where A: PartialEq<B> + ?Sized,

impl<A, B: ?Sized> PartialEq<&B> for &mut A

where A: PartialEq<B> + ?Sized,

impl<A, B: ?Sized> PartialEq<&mut B> for &A

where A: PartialEq<B> + ?Sized,

impl<A, B: ?Sized> PartialEq<&mut B> for &mut A

where A: PartialEq<B> + ?Sized,

impl<B: PartialEq, C: PartialEq> PartialEq for ControlFlow<B, C>

impl<Dyn: ?Sized> PartialEq for DynMetadata<Dyn>

impl<F: FnPtr> PartialEq for F

impl<H> PartialEq for BuildHasherDefault<H>

impl<Idx: PartialEq> PartialEq for core::ops::Range<Idx>

impl<Idx: PartialEq> PartialEq for core::ops::RangeFrom<Idx>

impl<Idx: PartialEq> PartialEq for core::ops::RangeInclusive<Idx>

impl<Idx: PartialEq> PartialEq for RangeTo<Idx>

impl<Idx: PartialEq> PartialEq for RangeToInclusive<Idx>

impl<Idx: PartialEq> PartialEq for core::range::Range<Idx>

impl<Idx: PartialEq> PartialEq for core::range::RangeFrom<Idx>

impl<Idx: PartialEq> PartialEq for core::range::RangeInclusive<Idx>

impl<Ptr: Deref, Q: Deref> PartialEq<Pin<Q>> for Pin<Ptr>

where Ptr::Target: PartialEq<Q::Target>,

impl<T> PartialEq for (T₁, T₂, …, Tₙ)

where T: ?Sized + PartialEq,

This trait is implemented for tuples up to twelve items long.

impl<T> PartialEq for Discriminant<T>

impl<T> PartialEq for NonZero<T>

where T: ZeroablePrimitive + PartialEq,

impl<T, U> PartialEq<[U]> for [T]

where T: PartialEq<U>,

impl<T, U, const N: usize> PartialEq<&[U]> for [T; N]

where T: PartialEq<U>,

impl<T, U, const N: usize> PartialEq<&mut [U]> for [T; N]

where T: PartialEq<U>,

impl<T, U, const N: usize> PartialEq<[U; N]> for &[T]

where T: PartialEq<U>,

impl<T, U, const N: usize> PartialEq<[U; N]> for &mut [T]

where T: PartialEq<U>,

impl<T, U, const N: usize> PartialEq<[U; N]> for [T; N]

where T: PartialEq<U>,

impl<T, U, const N: usize> PartialEq<[U; N]> for [T]

where T: PartialEq<U>,

impl<T, U, const N: usize> PartialEq<[U]> for [T; N]

where T: PartialEq<U>,

impl<T, const N: usize> PartialEq for Mask<T, N>

where T: MaskElement + PartialEq, LaneCount<N>: SupportedLaneCount,

impl<T, const N: usize> PartialEq for Simd<T, N>

where LaneCount<N>: SupportedLaneCount, T: SimdElement + PartialEq,

impl<T: PartialEq + Copy> PartialEq for Cell<T>

impl<T: PartialEq + ?Sized> PartialEq for ManuallyDrop<T>

impl<T: PartialEq> PartialEq for Bound<T>

impl<T: PartialEq> PartialEq for Option<T>

impl<T: PartialEq> PartialEq for Poll<T>

impl<T: PartialEq> PartialEq for OnceCell<T>

impl<T: PartialEq> PartialEq for Saturating<T>

impl<T: PartialEq> PartialEq for Wrapping<T>

impl<T: PartialEq> PartialEq for Reverse<T>

impl<T: PartialEq, E: PartialEq> PartialEq for Result<T, E>

impl<T: ?Sized + PartialEq> PartialEq for RefCell<T>

impl<T: ?Sized> PartialEq for *const T

impl<T: ?Sized> PartialEq for *mut T

impl<T: ?Sized> PartialEq for PhantomData<T>

impl<T: ?Sized> PartialEq for NonNull<T>

impl<Y: PartialEq, R: PartialEq> PartialEq for CoroutineState<Y, R>